Wednesday , September 23 2020
Home / Networking / 5 questions to answer before deploying Wi-Fi 6

Wi-Fi 6 offers many valuable new features including speed and higher density, but it’s different from its predecessors, so make sure your wired network and your organization are ready for it.

5 questions to answer before deploying Wi-Fi 6


Contributing Writer,

Network World |

The Wi-FI 6 standard (802.11ax) is bringing many exciting improvements to Wi-Fi that make it an enticing option. These include speed, in the form of real-world multi-gigabit wireless connections, but also support for high-density networks like those in stadiums. However, it will take some careful thought and planning to know when to take the leap to Wi-Fi 6.

To make multi-gigabit wireless speeds possible, most Wi-Fi 6 access points (AP) ship with a 2.5Gbps or 5Gbps LAN connection, whereas nearly all Wi-Fi 5 APs have a 1Gbps interface. Connecting a Wi-Fi 6 AP to a typical gigabit network is possible but will bottleneck the speeds of the Wi-Fi so clients won’t be able to realize connection speeds over 1Gbps to the internal LAN or internet.

On the other hand, you might not need such fast Wi-Fi-access speeds. For casual Wi-Fi usage by smartphones and laptops in an office you probably don’t. But it would help on networks with a high-density of users or those with sensitive or high-throughput applications like streaming 4K videos – especially if the content is coming from within the LAN instead of the Internet.

Evaluate your current network to see what needs upgrading on the wired side in order to get the multi-gigabit support. Here’s what to look for:

When looking at multi-gigabit support for switches, PoE, and routers you’ll see options for the maximum data supported: 2.5Gbps, 5Gbps, and 10 Gbps. For Wi-Fi 6 you’ll likely only need 2.5Gbps or 5 Gbps. But for future-proofing both the wired and wireless sides, consider 10 Gbps. For the cabling, Cat6a, Cat7, and Cat7a all support the same max data rate of 10 Gbps, but each has higher bandwidth than the previous one.

With any Wi-Fi deployment you should always do a site survey before deploying APs. We already discussed most of what you want to look for in a LAN survey. A wireless or RF survey can help you locate the best spots to mount APs in order to get  the best coverage, roaming, and performance. The range and coverage of Wi-Fi 6 may be similar to that provided by the older standards but there are differences in regard to density that can affect the placement and configuration settings.

If you haven’t done a lot of Wi-Fi work, find someone who has. Guessing at where to place the APs, especially for bigger networks, can be a costly mistake. There are methods and tools to help better design Wi-Fi networks, including analyzers and heatmapping software. A professional survey can save time, money, and headache.

Although the Wi-Fi 6 APs are backward compatible with the older Wi-Fi client standards (802.11a/b/g/n/ac), you won’t be able to realize all the Wi-Fi 6 speed improvements unless using a Wi-Fi 6 client. At the time of this writing, there aren’t many client devices supporting Wi-Fi 6. You’ll find the Samsung Galaxy S10 and Apple iPhone 11 phones do, along with some newer laptops and desktops.

For most networks, it makes sense to wait until the client devices are upgraded to Wi-Fi 6. But if you have a special network or select devices that need extremely high throughput you might consider upgrading sooner. For desktop computers, there are PCIe adapter cards available. We couldn’t find any USB adapters on the market yet. To upgrade laptops right now, you’d likely need to purchase a M.2/NGFF Wi-Fi 6 adapter, if the laptop has a compatible slot for Wi-Fi cards.

To see what’s currently out there supporting Wi-Fi 6, check out the Wi-Fi Alliance’s Product Finder.

Like we saw with 802.11ac, we’ll see 802.11ax come out in phases. We’ll first see devices only sending/receiving up to 4 simultaneous spatial streams, and up to 8 later. Right now, we only have multi-user MIMO (MU-MIMO) on the AP-to-client downlink, while later they’ll add clients-to-AP uplink support as well. However, right away we’ll see the new orthogonal frequency division multiple access (OFDMA) feature working in both directions, allowing multiple clients that have different bandwidth requirements to connect to the same AP at the same time.

Eric Geier is a freelance tech writer who posts on  Facebook and Twitter. He’s founder of NoWiresSecurity providing a cloud-based Wi-Fi security service, and Wi-Fi Surveyors, providing RF site surveying.

This story, “5 questions to answer before deploying Wi-Fi 6” was originally published by

Network World.

Eric Geier is a freelance tech writer. He’s also the founder of NoWiresSecurity, which provides a cloud-based Wi-Fi security service, and Wi-Fi Surveyors, which provides RF site surveying.

Copyright © 2019 IDG Communications, Inc.

This Article was first published on

About IT News Ug

Check Also

Using low code platforms to learn development skills

By Juliet Beauchamp and Serdar Yegulalp, Computerworld | Hosts Juliet Beauchamp and Ken Mingis talk …

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.