Tuesday , September 29 2020

Routers are getting faster even while they’re getting back to basics by dropping smart home hub features.

TP-Link revs its mesh Wi-Fi router lineup to Wi-Fi 6, but leaves Zigbee behind


Executive Editor,

PCWorld |

TP-Link is showing three new mesh Wi-Fi routers at CES. Each model in the good, better, best Deco lineup is based on Wi-Fi 6 (aka IEEE 802.11ax), but none of them have the integrated Zigbee smart home hub that TP-Link brought to market with its earlier Deco M9 Plus.

The TP-Link Deco X90 leads the pack. This tri-band router promises to deliver 574Mbps on its 2.4GHz network, 1,201Mbps on its first 5GHz network, and a staggering 4,804Mbps on its second 5GHz network. The router has a dynamic backhaul feature that can utilize all three networks for that purpose. TP-Link says a $450 two-pack should be able to blanket up to a 6,000-square-foot home with Wi-Fi when it ships in April.

TP-Link’s best mesh router has some impressive specs—up until you look at its single WAN and LAN ports.

If you’re fortunate enough to have an ISP that can deliver gigabit broadband to your home, the Deco X90 is outfitted with a 2.5Gbps WAN port.  All three models have just one gigabit LAN port, however, so you’ll need a switch if your home has wired ethernet infrastructure.

For less demanding home environments, TP-Link’s new Deco X60 is a dual-band mesh Wi-Fi router capable of delivering up to 574Mbps on its 2.4GHz network and 2,402Mbps on its 5GHz network. TP-Link says a $270 two-pack should be capable of servicing up to 150 devices simultaneously, spread out over 5,000 square feet.

TP-Link’s Deco X60 can cover nearly the same range as its more expensive Deco X90.

TP-Links’ entry-level mesh router, the Deco X20, will be sold in a two-pack for $190 and in a three-pack for $270 when it ships in March. You’ll get the same wireless throughput of 574Mbps on this router’s 2.4GHz network, but speeds will drop to 1,201Mbps on its 5GHz network.

TP-Link is continuing its partnership with the cybersecurity firm Avira to offer HomeCare Pro on its mesh routers. The service offers optimized security for IoT devices such as a smart bulbs and smart thermostats, to prevent hackers from hijacking them. HomeCare Pro also includes customizable parental controls, but the service is not free: After a free trial, a subscription will cost $5.99 per month or $54.99 per year.  

TP-Link’s aggressive-looking conventional Wi-Fi 6 router is available in two forms: the Archer AX90 shown here and the gaming-oriented Archer GX90.

If gaming is your passion, TP-Link has a new line of powerful Wi-Fi 6 gaming routers. The top-of-the-line Archer GX90 is a tri-band model that promises to deliver up to 574Mbps of wireless throughput on its 2.4GHz network, up to 1,201Mbps on its first 5GHz network, and up to 4,804Mbps on its second 5GHz network that’s specifically dedicated to gaming. This one has a 2.5Gbps WAN/LAN port, a 1Gbps WAN/LAN port, and a three-port gigabit LAN switch onboard. Added connectivity comes in the form of a USB 3.0 port and a USB 2.0 port.

The Archer GX90’s Gaming Accelerator feature will automatically detect gaming-oriented traffic on the network and assign it a higher priority to deliver the best performance with online games. TP-Link expects the Archer GX90 to fetch $330 when it ships in in late Q2.

If you can’t wait, or you don’t need the gaming features, the Archer AX90 is essentially the same router less those gaming optimizations. This model features the same aggressive industrial design and will cost $300 when it ships in April.  

With two of TP-Link’s CPE710 802.11ac Wi-Fi antennas, you can create two networks that are kilometers away using a single broadband source.

TP-Link didn’t send me any information on this directional Wi-Fi antenna, because it’s aimed (no pun intended) at the enterprise market, but it caught my eye at the show. Mount one TP-Link CPE710 outside the building where your router is located, and you can beam an 802.11ac Wi-Fi signal with up to 867Mbps of throughput to a distant location—the spokesperson I talked with told me its range could be measured in kilometers.

You’ll need to install a second CPE710 at the receiving location, and connect it in turn to a Wi-Fi access point to create a second Wi-Fi network there, but it means you won’t need a second ISP service plan at that second location. You’ll make up the cost of the two antennas (expected to be less than $150 each) in no time.

This story, “TP-Link revs its mesh Wi-Fi router lineup to Wi-Fi 6, but leaves Zigbee behind” was originally published by


Michael covers the smart-home, home-entertainment, and home-networking beats, working in the smart home he built in 2007.

Copyright © 2020 IDG Communications, Inc.

This Article was first published on itnews.com

About IT News Ug

Check Also

Using low code platforms to learn development skills

By Juliet Beauchamp and Serdar Yegulalp, Computerworld | Hosts Juliet Beauchamp and Ken Mingis talk …

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.